Products
We carry all the parts you need to keep your Ice Bulldog CNC Ice Router running great!
Below you will find the most common parts we provide and stock, but we supply every possible part you might need also.
If it has been a long time since your machine has been serviced you may want to consider the following:
- Linear bearings
- Cables
- Chains
- Springs
- Hubs (XL, XR, Y, Z, and idler)
Ice Bulldog Parts
Picture |
Part # |
Description |
Price (USD) |
|---|---|---|---|
.jpg) |
DX-INFICE |
New Replacement Controller
|
$4995 |
 |
DX-SPEED |
Double your machine's speed |
$595 |
|
DX-LINBEAR |
Linear Bearing |
$349 |
|
DX-LINBEAR10 |
Linear Bearings - Set of 10 A standard Bulldog requires: X Axis = 4 |
$ Save $517 when you buy the full set |
 |
DX-XLCI |
XLC-I Card |
$1675 |
 |
DX-STEPCARD |
Stepper Drive Card |
$255 |
DX-STPCON |
Connectors New connectors for XLC-I card or Stepper Drive card. If you are having troubles with erratic behaviour or loss of position you may need new connectors. |
$45 |
|
 |
DX-ESTOP |
Emergency Stop Button E-stop switches |
$35 |
 |
DX-LIMSW |
Limit Switch |
$35 |
|
DX-LIMSW3 |
Limit Switchs - Set of 3 |
$90 |
 |
DX-STPMTR |
Stepper Motor Includes sprocket and connector |
$734 |
|
DX-STPMTRCT |
Stepper Motor - CamTech For CamTech machines only - X Axis Includes the double sprocket and upgraded connector |
$794 |
|
DX-HARNESS |
Full Wire Harness Spindle, X-Y-Z Motor, X-Y-Z Limit, and Left & Right Emergency stop Replace old and cracking PVC or vinyl (grey) cables with new extra durable Presidium Polyurethane Cables (black). |
$2995
Save $235 when you buy the full set |
 |
DX-HARNSNG |
Wire Harness - Single Axis X or Y or Z Motor Cable Replace old and cracking PVC or vinyl (grey) cables with new extra durable Presidium Polyurethane Cables (black). |
$745 |
|
DX-HARNLIM |
Wire Harness - Limits & Estop X-Y-Z Limit, and Left & Right Emergency stop Replace old and cracking PVC or vinyl (grey) cables with new extra durable Presidium Polyurethane Cables (black). |
$995 |
 |
DX-HUBDRV |
Drive Hub (XL, XR, Y, or Z)
|
$1495
|
 |
DX-HUBIDL |
Idler Hub
|
$1495
|
 |
DX-SHAFT |
Drive Shaft X, Y, or Z New Pinion on 5/8" Shaft |
$547 |
 |
DX-SHAFTXYZ |
Drive Shaft Full Set of 4 XL, XR, Y, and Z New Pinion on 5/8" Shaft |
$1787
|
DX-HUBBEAR |
Pair of Bearings for 1 Hub For rebuilding your own hub. Bearings are machine pressed into aluminum housing. Often you will want to replace the Drive Shaft with Pinion at the same time - or just order a complete hub instead. |
$197
|
|
 |
DX-PLIERS |
Snap Ring Pliers For rebuilding your own hub. |
$48
|
 |
DX-VFD |
Inverter VFD (Variable Frequency Drive) or Inverter To replace TB Woods X2C Controls the spindle |
for Pricing |
 |
DX-SPINDLE |
Spindle 15,000 RPM Columbo, Perske, and HSD |
for Pricing |
DX-WRENCH |
Spindle Wrench Alumimum wrench for changing tools |
$185 |
|
 |
DX-CHAIN |
Full Chain Kit Kit includes: XL-Drive, XR-Drive, X-Motor, Y-Drive, Y-Motor, Z-Drive, Z-Motor Chains stretch and wear over time and need to be replaced. |
for Pricing |
 |
DX-ETRACK |
Cable Chain Track (e-Track)
|
$30 / foot |
 |
DX-RAIL |
Linear Rail This does not normally need replacing unless it has been damaged by bad bearings.
|
for Pricing |
 |
DX-RACK |
Gear Rack This does not normally need replacing unless it has been damaged by damaged pinions. |
$345 / 6 feet |
DX-DECK |
Deck Top UHMW Plastic replacement for the machining surface - deck table |
for Pricing |
|
DX-SPRING |
Z Lift Springs - Pair If your Z head falls when power is removed you need to replace your spings. |
$95 |
2973
*Core Charge - This amount will be added to the total price.
If the old part is sent back to DashX the core charge will be refunded.