Infinite ∞ Ice
CNC Controller Manual

Specifications

• 120/220VAC 10Amps
• 33 x 26 x 9cm (13 x 10 x 3.5in)
• 2.3kg (4.9 lbs)
• Compatible with all stepper motor CNC machines
• Compatiable with Windows 10/11 (and older)
• Ethernet Network interface
• Mach3/4 Interface software (G-code)

 

Connectors

Front

1. X - X Stepper Motor
2. Y - Y Stepper Motor
3. Z - Z Stepper Motor
4. Limits - Limit Switches and Emergency Stop Buttons
5. VFD - Variable Frequency Drive (Inverter)

Back

1. Network - PC Network Port
2. Power - 120VAC/60Hz

 

Status Panel

• Power
  • Blue = On
  • None = Off
• Ready
  • Blue = Ready (No E-stop and Mach is connected)
  • Red = E-stop button is pressed
  • None = Mach isn't connected
• Spindle
  • Blue = On
  • None = Off